Shenzhen IJOY Technology Co.,Ltd original design ETOP-A
Intelligent High-end Design
Highly DIY Concept
Luxury Enjoyment
Splendid Quality
More details pls visit our facebook page:
ETOP-A User Manual
ETOP-A mod adopts the mode of constant power output, In the constant voltage output mode 3-15w is adjustable, the MOD has A built-in function to test atomizer’s real resistance of impedance, automatically determine the resistance and then adjust the suitable output voltage, and under the resistance to set the corresponding wattage, reach the same output vapor
The mod features full intelligent A recognition tap position, which can adapt to all types of atomizers on the market, and allows user to increase or reduce the automatic transmission gear appropriately, “-”tap position to reduce, “+” tap position to increase.
Ways for charging the battery is to take out the battery from battery tube and with external charger.
一：Working Protection:
The mod has the protect functions of battery reverse connect, whole mod current 5A overload , low voltage for battery and short circuit protection, users can be assured to try IJOY products.
1.1 .Battery and low voltage protection:
The mod is adapt to single 18650 or single 18350 battery, also is suitable to double 18350 batteries.
In the condition of one 18650 battery and two 18350 batteries, the maximum output wattage both can reach 12W. If with two 18350 batteries, the maximum would be at 15W
The maximum input is 9v, under the circumstance of double batteries when voltage below 6.6V, then there would be alarm for low voltage, one 18350 battery and below 3.3 V, also would a alarm. When in the condition of low voltage, the alarm buzzer would have a rapid ring (di di di di di di) 6 times,with the LED lights flashing at the same time.
1.2 .Short circuit protection:
when the mod is working ,it would always detect automatically and continuously to make sure whether the short circuit exist or not at the output.
Once exist,it would stop the output at the first time, and with hint of sound and light, buzzer would ring (di di di) 3 times and the led light flash 3 times suggesting that there is a short circuit
At this time , user could unscrew atomizer to check whether there is short circuit.
After troubles are cleared, then please use this product.
二：Working parameters
2.1.Normally the mod is suitable for atomizers with resistance of 1.0Ω, 1.2Ω,1.5Ω, 1.8Ω, 2.1Ω,2.4Ω, 2.8Ω, 3.0Ω etc., and can automatically match the output power in current set value. Regardless of which kind of resistance, as long as within the scope of above
then can be normal used.
2.2 .static current: < 200 uA, typical for: 150 uA
三：Basic Functions:
3.1. When the mod is equipped battery with correct polarity, the LED will flash for one time and at the same time a buzzer long ring, indicating it had loaded with correct battery cell and enter standby mode.
3.2 .Smoking timeout protection:
if buttons work time over 6s, forced to close the output. Enter the mode of standby, until release the button and repress.
3.3. Normal smoking the LED is on with light.
3.4，Turn on/off
To turn off,Pressing button five times and light flashing 3 times, then there will be no output, the whole mod in the condition of off,even rotate gear adjusting part would not have any sound and light hint.
To turn on,pressing the button five times, light flashing 3 times and buzzer long rang, sign turn on successfully, and enter standby mode.
3.5.Adjust the power
user can manually rotating gear set section suitable power part, for every tap position, there will be a ring of “di”, means rotated, continuous rotation would be continuous sound.
3.6.A profile for automatic identification, could adapt to all types of atomizer on the market, and allows the user to increase or reduce appropriately automatic transmission gear, “-”file to reduce, “+”to increase.
