2014年2月11日星期二

How to control the Transformer working for you ? Pls see ETOP-A user manual / user guide


Introduction of ETOP-A

Thank you for purchasing and using this awesome design e cigarette mod ETOP-A.

Etop-a is a High-tech microprocessor controlled variable wattage (VW) personal vaporizer . Mechnical design adjustable function dial with Cool transformer logo bring cool visual and vaping experience. Then go with the airflow adjustable BCC glassomizer FAATANK-G ,  absolutely will be the most fashionable smoke device on 2014.

Etop-a Kit Includes
1* Etop-a Device Body
1* FAATANK-g clearomizer
1*18350/18650 Battery
1* Battery Charger
1* Manual
1* Gift Box

Please read the instructions and precautions before using the ETOP-A
General Introduction Of Etop-a
Etop-a is a wattage-steady output device, wattage adjustable from 3W to 15W.The inner PCB board is able to test the coil resistance, by testing the resistance to adjust suitable output voltage and wattage automatically,then you can got the suitable vapor as you want.

Build-in smart PCB board, when rotating the dial to “A” can adapt to all types of atomizers on the market, Rotating to “+” to increase the current wattage ,Rotating to “-” to reduce the current wattage. “A” gear is easily operating for vape starter 


General function of ETOP-A

*Variable Wattage
Working with two 18350 battery ,Adjustable from 3W to 15W (0.5W increments)
Working with one 18650 battery ,Adjustable from 3W to 12W (0.5W increments)
*Intelligent auto PCB board
*suitable atomizers with resistances of 1.0Ω-3.0Ω.
*Operating Voltage : 3.0V--6.0V
*Battery capacity : 2200mah
*Charging Time : 4 H
*Suitable for ego and 510 thread
*static current: < 200 uA, typical for: 150 uA
*Dimensions :23*134mm(with 18650 battery)
            23*103mm(with one 18350 battery)
*battery reverse connect protection
*Overload protection/Low voltage protection
*Short circuit protection/Atomizer protection
*Overtime Vaping Warning/Over-Discharge Protection

How to vapor with ETOP-A

*When Etop-a equipped batteries in correct polarity, the blue led will flash for one time,meanwhile, the beeper will have a long rang.It indicating you have put battery in a correct way and mod enter standby mode ,if not, it won’t work. Now you should check the battery positive (+) and negative (-) and ensure it equipped in the right way.

*To turn on,Quickly pressing the button 5 times will turn the ETOP-A on, blue LED light will flashing 3 times and beeper will long rang,Then holding down the button will activate the battery, then you can enjoy ur huge vapor .

*To turn off,Quickly pressing the button 5 times will turn the ETOP-A off, blue LED light will flashing 3 times and beeper will long rang.

*To adjust the power
Rotating dial adjust wattage to got suitable power , Rotated every step will with a “di” sounds, it means wattage have been changed successfully.

When rotating the dial to “A” gears, it can suit 99% atomizer in the market.
Rotating to “+” to increase the current wattage 
Rotating to “-” to reduce the current wattage
Easily by rotating dial to got your favourite vapor.

  
*To protect atomizer and battery,the battery will enter into standby mode when it keeps working over 6s. Then loosen the button and click it once more, Etop-a will work again.

*The Etop-a will shutdown output when short-circuit happens, at the same time, it will warning with 3 sounds “di di di” and Blue LED keep flashing 3 times.Right now, user should check the atomizer and ensure the mod normal working.

*Etop-a can working with18650 and 18350 battery.
Working with one 18650 battery or one 18350 battery,the maximum output wattage both can reach 12W. 
Working with double18350 batteries, the maximum would be at 15W.
The maximum input of ETOP-A is 9v.
Working with double battery,when voltage below 6.6V, it will warning with 6 sounds “di di di di di di” and Blue LED flashing.
Working with one battery, when voltage below 3.3V, it will warning with 6 sounds “di di di di di di” and Blue LED flashing.
 (Tip: Normal smoking the LED light will on )

WARNING:
 
1. The ETOP-A is intended for use by people of legal age (18+), NOT by non-smokers, children, pregnant or breastfeeding women, people with or at risk of heart disease, or people taking medication for depression or asthma. The ETOP-A is neither intended for or marketed as a quit smoking aid or cessation device.
2. This unit may include small parts, please keep out of reach of children and pets.
3. Don’t abuse your ETOP-A even though it’s made of stainless steel, you may damage it by dropping it.
4. Don’t attempt to repair the unit by yourself as damage or personal injury may occur. 
5. In order to guarantee the normal function of ETOP-A and the effect of vaping, we suggest that you charge your batteries when they are below 10% power.
6. In order to prolong the function of your ETOP-A, please don not place it in too hot or too cold environment.
7. Please obey local laws or regulations while vaping. If there are any bans or potential dangers, please keep the ETOP-A off.
8. Your ETOP-A is not waterproof, please keep it dry.
9. Keep your ETOP-A from sources of excessive heat.
10. Please don’t drop, throw or abuse your ETOP-A, you may cause damage to outer shell or Inner components.
 
 
 
Warranty
Please consult with IJOY official distributors for their warranty and return policy. IJOY’s warranty does not apply to products purchased through third party vendors.

2014年2月9日星期日

World up 2.8ml Aspire Nautilus/Faatank-g Adjustable Airflow Cartomizer/ clearomizer

2.8ml FAATANK-G/Aspire Nautilus Adjustable Airflow Bottom Coil Changeable Pyrex Glass Clear Cartomizer.



The faatank-g tank has truly raised the bar with clearomizer tanks. Everything about this device is flawless; it's engineered and machined phenomenally well. With its pyrex tank and copper body it's extremely durable. The large press-fit o-rings ensure that it does not leak, and the ample amount of wicks ensure that gurgling is rare. If there is a little buildup, opening the airflow to a higher setting and taking a good drag will almost immediately vaporize the built-up liquid, getting rid of the gurgle. It also features a glue-free design, allowing it to be taken apart completely for thorough cleaning. The drip tip is detachable, allowing you to use one of your choice.
     It's a bottom coil e-cigarette clearomizer with adjustable airflow. The base of the faatank-g has a rotating ring with a clicking lock to adjust the airflow to your preference; the options for airflow holes are .8mm, totally 3 hole there,so you can got 0.8mm,1.6mm,2.4mm.
 It holds an impressive 5ml of your favorite e-liquid. The coils that thefaatank-g uses have 4 punched holes and an fficient wick setup to ensure that you always get a full, consistent vape even at higher volts/watts. Included with the Aspire Nautilus are 2 dual coil units (1.6ohm and 1.8ohm), chrome "beauty ring" for a more flush look with smaller batteries, and an instruction manual.
   
Refilling the tank and replacing the coil are both done through the bottom of the device. To refill it, unscrew the base of the clearomizer from the tank. Drip your e-liquid of choice into the tank around the center tube but avoid allowing any to overflow into it. Use the milliliter lines on the side of the tank as a guide. To replace the coil, unscrew the base from the tank just like you were refilling it. The short stem with knurling that protrudes from the base is the coil unit; unscrew it from the base and discard it. Screw a new one into the base (only finger tight!) before screwing it back on to the tank. After installing a new coil, let it it sit for a few minutes to allow the wicks to become properly saturated before using.


More interest, pls check out here: